Entrance for the
registered users
Selective Inductive Metal Detector Pilgrim-7246F
Selective Inductive Metal Detector (MD) PILGRIM-7246F is intended to search metal objects in dielectric (dry silicate sand, solid wood, etc.) and low-conductive environment (moist soil, brick wall, etc.).
MD PILGRIM-7246F has manual built-in system compensating magnetic features of the soil that affect searching process. Also, this system adjusts sensor signal amplification value and detection level. Operator is able to switch between search mode needed: «All Metals» and «Non-Ferrous Metals».
When metal object is detected, MD PILGRIM-7246F generates 3-tone audible alarm signal:
- low frequency signal indicates that small ferrous metal object is detected (nails, metal wire, splinters, etc.);
- mid frequency signal indicates that foil-type object is detected;
- high frequency signal indicates that indicates that non-ferrous metal object or big foliate ferrous object is detected.
MD PILGRIM-7246F has two control modes: dynamic and static.
When in dynamic mode, MD indicates presence of metal object during its sensor movement. When in static control mode, MD indicates presence of metal object irrespective to its sensor movement.
Technical Specifications:
| Maximum detection distance of metal objects (in the air), mm coin D 25mm Makarov pistol drain hatch big objects |
500 800 1700 2500 |
| Dimensions, mm telescopic rod (max.) electronic unit sensor diameter |
1200 135×105×85 260/210 |
| Power source | 6 AA size batteries |
| Continuous operational time, hours | Up to 12 |
| Mass, kg | 1.5 |